1. When you need to use a key repeatedly in some shooting and action games, you should be good at using the burst switch to reduce the number of keystrokes.
2. When playing games, the movement range should not be too large, and the connection can be made longer. Not only can it be farther away from the screen to protect your eyes, but the connection is also less likely to break.
3. The handle should be placed in a clean environment, otherwise the buttons will be inflexible if dirt is embedded between the direction buttons and the function buttons.
4. If you feel that the buttons are not sensitive after using for a period of time, you can disassemble the handle and wipe the conductive rubber and circuit board with cotton moistened with alcohol.
5. The most vulnerable part of the handle is the cable, because there are many thin wires inside the cable. If any of the wires are broken, it will cause the handle to malfunction. The most likely place for the game handle to break is at the two joints of the handle. You can disassemble the handle and use a multimeter to measure the interface and bend the suspicious part during measurement. You can find the hidden decapitation. If the broken head is close to the handle, you can cut off a piece of wire and re-solder it. If the broken head is close to the interface, the interface of the handle is generally sealed at one time, so you can only buy a 15-pin interface and replace it.
6. The conductive rubber is also easy to damage, but in most cases, it can be repaired as long as the handle is removed and wiped. There are two situations to conclude that the handle is really broken: one is that the conductive rubber is broken and loses its elasticity; the other is that the conductive film loses its conductivity. For the first case, you can only replace the conductive rubber with a new one. For the second case, you can have an emergency method: stick a conductive object on the corresponding position, or use a 4B pencil to smear the original conductive film. When the controller passes the above inspection and there is no disconnection, it should be suspected to be the problem of the circuit board, but the components on the game controller circuit board are less likely to be damaged. Most of the components are soldered. Use a soldering iron to repair it. can.
